The Comfort Plush Elevated Airbed is a part of the Dura-Beam series of
airbeds that are providing amazing durability for years of lasting comfort. The
secret is in the Fiber-Tech beam construction, which is comprised of thousands
of high-strength polyester fibers that provide enhanced comfort, stability and
support.
![]() |
Dura-Beam Airbed |
Each bed is covered in plush flocking that is soft to the touch, and
the horizontal air chambers provide added stability and support around the
entire bed. The mattress is also equipped with a quality-tested, 20.8-gauge
waterproof flocked top with 15-gauge vinyl beams and 16-gauge sides and bottom
for durability. And best of all, the Comfort Plush mattress is remarkably easy
to inflate thanks to the built-in, high-powered electric pump, which does its
job in a mere 3-1/2 minutes.
No more fussing with tiring hand or foot pumps or
rummaging through the garage for your detached electric pump. And should the
mattress feel a little too soft or firm, you can customize the comfort level
with the touch of a button. The Comfort Plush is raised 22 inches from the
floor, making it far taller than most inflatable mattresses. And at 60 by 22 by
80 inches (W x H x L), the mattress is an official queen size, making it a good
fit for fitted sheets. The Comfort Plush Queen bed--which offers a capacity of
600 pounds--is a terrific choice whether you're sleeping at the in-law's
overcrowded house or setting up a guest bed in the basement.
![]() |
Dura-Beam Airbed |
The mattress comes
with an AC power cord and a duffel bag (for storage). Regarding Inflation:
Measurements will vary based on the manner in which it is inflated and
packaging disclaims “approximate size”. Airbeds are measured from the widest
point including the beams (bulges) on the side and off the tallest point from
the floor including built-in pillows if applicable. Location, temperature, and
humidity will affect the airbed’s firmness.
Airbeds will need to be
occasionally re-inflated (topped off) to maintain desired firmness when used
for more than a few days as vinyl tends to relax over time.If electrical power
is not available then a separately operated pump can be connected to the
control valve for inflation: simply turn the control dial to the inflation
symbol, insert the air pump nozzle into the valve at the center of the control
dial, and inflate the airbed.
- Inflatable
Queen airbed for home use engineered with Fiber-Tech(TM) Construction
- Built-in, high-powered electric pump for hassle-free inflation and
deflation, inflates mattress in approximately 4 and 1/2 minutes to the desired
firmness
- Waterproof flocked top raised 22 inches from floor with indented sides
to keep your fitted sheets from slipping
- Duffel bag included for easy storage and transport
- Dimensions: 60 x 22 x 80 inches (W x H x L), 600-Pound capacity
Subscribe to:
Post Comments (Atom)
Post a Comment